TM 10-3930-675-24-2
REAR AXLE ASSEMBLY REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
References - Continued
Maintenance Level
Direct Support
Tools and Special Tools
Tool Kit, General Mechanic's (Item 128, WP 0289
Equipment Condition
Vehicle parked on level, hard surface
Front wheels chocked
Cab and boom support in transport position (TM
Materials/Parts
10-3930-675-10)
Grease, Automotive and Artillery, GAA (Item 20,
Rear brake hydraulic hoses and fittings removed
O-ring (P/N 923873.0006) (2)
Personnel Required
Rear wheel temperature sensors removed (WP 0093
Three
References
WARNING
Hydraulic jacks are intended only for lifting RTCH, not for supporting vehicle to perform main-
tenance. DO NOT get under vehicle after it is raised unless it is properly supported with blocks or
other suitable cribbing. Failure to observe this warning may result in death or injury to person-
nel.
Use extreme caution when handling heavy parts. Provide adequate support and use assistance
during procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this warning
may result in death or injury to personnel.