TM 10-3930-675-24-2
CYLINDER BLOCK REPAIR - CONTINUED
0271 00
DISASSEMBLY - CONTINUED
1.
Install cylinder liner puller in top of cylinder block.
PLATE
CYLINDER
BLOCK
CYLINDER
LINER PULLER
NOTE
Ensure liner puller is centered on top of cylinder liner being removed.
2.
Turn puller jackscrew clockwise to loosen cylinder liner from cylinder block.
3.
Use both hands to remove liner. Remove and discard O-ring.
JACKSCREW
CYLINDER
LINER
O-RING
NOTE
Cylinder liners must be reinstalled in cylinder from which they were removed.
4.
Mark cylinder liner with cylinder number and place orientation mark on camshaft side.
5.
Perform steps 1 thru 4 for each liner to be removed.
0271 00-2