TM 55-8145-201-14
5-2. REAR DOOR REPLACEMENT.
This task consists of:
a. Removal
b. Installation
INITIAL SET-UP:
Tools:
References:
General Mechanics Tool Kit (Item 4, App B)
TM 9-4110-252-14
TM 5-6115-585-12/34
TM 9-237
TM 9-213
Material/Parts:
Equipment Condition:
Hinge Pin (4) (Item 24, App F)
Refrigeration unit shutdown (TM 9-4110-252-14)
Hinge Bearing (8) (Item 23, App F)
Personnel Required:
Two
NOTE
Replacement of right rear door is
shown.
Replacement of left rear door is similar.
a. Removal.
(1) Open rear door (9).
(2) Using cutting torch or grinder, remove weld securing hinge pin (2) to hinge brackets (1 and 8). Repeat for
three other hinges.
WARNING
Door is heavy/difficult to handle. Use two personnel
when removing door.
(3) While supporting rear door (9) with hoist, drive out hinge pins (2) from four door hinges (5).
(4) Remove rear door (9) from hinge brackets (1 and 8).
(5) Remove washers (3 and 7) and bushings (4 and 6) from door hinges (5).
b. Installation.
(1) Install new bushings (6 and 4) in door hinges (5).
WARNING
Door is heavy/difficult to handle. Use two personnel
when installing door.
(2) Hoist rear door (9) into position on hinge brackets (1 and 8).
(3) Position washers (7 and 3) between hinge bushing (6 and 4) and hinge brackets (1 and 8) as shown.
5-2