ATTACH LIFT FRAME TO CONTAINER
Attach Upper Guides
Use a ground guide AT ALL TIMES when unloading/loading lift frame and
Stay clear of moving lift frame during unloading/loading.
Failure to follow these warnings may result in injury or death to personnel. Seek
medical attention in the event of an injury.
Reverse vehicle and position upper guides (Figure 1, Item 1) just above top of container (Figure 1, Item 2). If
necessary, use joystick to adjust height of lift frame (PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P).
Figure 1. Position Upper Guides.
Do not attempt to complete step 2 if upper guides do not become fully located on corner
castings. Failure to follow this warning may result in injury or death to personnel and
damage to equipment. Seek medical attention in the event of an injury.
Keeping engine at idle speed, set joystick (Figure 2, Item 1) to UNLOAD (PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P) and move vehicle as required to ensure upper locating pins fully descend
into upper apertures in upper-corner castings of container (Figure 2, Item 2). Top plates of upper guides
should be in contact with corner castings.