TM 10-3930-641-10
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
AFTER OPERATION
0005 00
Perform After operation PMCS (WP 0011 00 and WP 0012 00).
1.
2.
Remove key from main disconnect switch.
3.
Close and lock doors and windows.
LOADING AND UNLOADING CONTAINER
0005 00
WARNING
NEVER operate RTCH or move load near a power line or overhead wires. Failure to follow this warn-
ing may result in injury or death to personnel or damage to equipment.
Be ALERT for personnel in the area while operating machine. Always check to ensure area is clear of
personnel and obstructions before moving machine or raising or lowering container handler forks. Fail-
ure to follow this warning may cause injury or death to personnel or damage to equipment.
NOTE
During lifting operation, do not exceed maximum lifting capacity of 50,000 lb (22,700 kg).
Refer to WP 0004 00 for the location and operation of controls and indicators.
1.
Loading.
a.
Center and level tophandler when approaching container.
b.
Position front of machine to broadside of container.
NOTE
Tophandler aligning arm mounting bolts will break under pressure to prevent damage to container or tophan-
dler. If bolts break, notify Organizational Maintenance.
c.
Approach container cautiously.
d.
Position container locks over container corners,
using tophandler corner guides.
e.
Push lift control lever to lower container locks
into container fittings. Ensure that BOTH yellow
READY TO LOCK lights come on. One light
means only one container locks is in position.
Red LOAD LOCKS UNLOCKED light will also
be on.
f.
Pull container locks control lever to lock tophan-
dler to container. Ensure that green LOAD
LOCKS LOCKED light comes on. Two yellow
CONTAINER LOCK
422-0042
READY TO LOCK lights will also stay on, but
INDICATOR PANEL
red LOAD LOCKS UNLOCKED light will go
out.
0005 00-10
