TM 10-3930-641-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ELECTRICAL INDICATORS - CONTINUED
1. Inspect hydraulic oil level (WP
5.
Implement Plugged Filter Light Comes On.
problem still exists, go to test step
2.
2. Inspect implement filter for
Notify Organizational
dirt.
Maintenance.
1. Check transmission oil level
Add transmission oil as needed
6.
Transmission Plugged Oil Filter Light
Comes On During Operation.
If problem still exists, notify
Organizational Maintenance.
ELECTRICAL SYSTEM
1. Ensure main disconnect
Turn switches to ON position. If
1.
Floodlights/Auxiliary Floodlights
Inoperative.
switch, power switch, and
problem still exists, go to test step
floodlight switch are in ON
2.
position.
2. Check for blown fuse #2 or #3
If fuse is blown, request a
in left-hand instrument panel.
replacement fuse of same rating
from Organizational
Maintenance. If fuse is
OK, go to test step 3.
3. Check light(s) for separated
Reconnect connector, if required.
connection or damage.
If connector(s) is OK, notify
Organizational Maintenance.
1. Check for blown fuse #15 at
If fuse is blown, request a
2.
Horn Will Not Sound When Button Is
right-hand instrument panel.
replacement fuse of same rating
Pressed.
from Organizational
Maintenance. If fuse is OK and
problem still exists, go to test step
2.
2. Check horn for separated
Reconnect connectors, if
connections or damage.
required. If connectors are OK,
notify Organizational
Maintenance.