TM 10-3930-641-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
STEERING - CONTINUED
Shut down engine.
Notify Organizational
3.
Steering Wheel Can Still Be Turned When
Maintenance.
Vehicle Is at Full Turn.
TRANSMISSION
Inspect speed control linkage (at
Notify Organizational
1.
Transmission Will Not Shift from One
Speed or Direction to Another or Shifts
Maintenance.
access opening behind operator's
Rough.
cab) for defective parts.
Check transmission oil level (WP
If transmission oil is low, fill to
2.
Transmission Shifts Slowly.
correct level (WP 0011 00 and
exists, notify Organizational
Maintenance.
Check transmission oil level (WP
If transmission oil is low, fill to
3.
Transmission Doesn't Work When Speed
correct level (WP 0011 00 and
Selection Lever Is Placed in Any Speed.
exists, notify Organizational
Maintenance.
1. Check transmission oil level
If transmission oil is low, fill to
4. Transmission Overheats (Torque Converter
Temperature Gage Needle is in the Red).
the correct level (WP 0011 00 and
go to test step 2.
2. Inspect transmission magnetic
If necessary, clean magnetic
strainer (WP 0012 00).
strainer (WP 0012 00). If
magnetic strainer is OK or if
problem still exists, notify
Organizational Maintenance.
TRANSFER CASES
Check all lines, fittings, drain,
Notify Organizational
1.
System Loses Oil.
Maintenance.
and plug for leaks.
Check transmission oil level (WP
If transmission oil is low, fill to
2.
Noisy Transfer Gears.
correct level (WP 0011 00 and
exists, notify Organizational
Maintenance.
END OF WORK PACKAGE
