TM 10-3930-641-20
(Sheet 2 of 3)
ALTERNATOR REMOVAL/INSTALLATION (CONT)
LOCATION/ITEM
ACTION
REMARKS
Install and tighten to 49-63 lb. ft. (66-85 Nm).
3. Capscrew (4)
a. Install.
4. Belt (3)
Belt should deflect no more than 9/16 to 13/16 when
b. Adjust by moving nuts (2) and block (7)
25 lbs. of pressure is appiied midway along top of belt.
along alternator adjustment rod (8).
Tighten to 21-27 lb. ft. (28-37 Nm).
5. Capscrews (5)
Tighten to 105-115 lb. ft. (142-156 Nm).
6. Nuts (2)
Tighten output terminal to 9-11 lb. ft. (12-15 N.m).
Connect. Be sure to attach in locations marked
7. Wires (1)
in Item 1.
End
