TM 10-3930-641-20
STARTING MOTOR REMOVAL/INSTALLATION (CONT)
(Sheet 2 of 3)
LOCATION/ITEM
ACTION
REMARKS
1. Panel (1)
a. Tag and disconnect three wiring harnesses
from back side of panel.
b. Remove four screws, Iockwashers, and
nuts (2) which hold panel (1) to frame.
c. Move panel (1) aside.
2. Capscrew, washer, and nut.
Remove from clip (3)
3. Capscrew
Remove capscrew and upper clamp from oil
filler tube (6).
4. Capscrews (4)
Remove.
5. Oil filler tube (6) and gasket
Loosen three capscrews (9).
Mark for location and disconnect.
Weight of starting motor is 75 lb. (34 kg). Be
yepared to hold motor when capscrews are
?emoved.
7. Capscrews (9)
Loosen three capscrews (9).
8. Motor
Attach lifting sling.
2-259