TM 10-3930-641-20
(Sheet 2 of 3)
PARKING BRAKE CONTROL LINKAGE REMOVAL/INSTALLATION (CONT)
LOCATION/ITEM
ACTION
REMARKS
NOTE
Make sure all oil pressure is relieved from brake
system before disassembly. Turn off engine and
relieve pressure by pressing a brake pedal re-
peatedly until ail brake oil pressure is relieved.
Loosen.
1. Nut (7)
Remove from parking brake valve.
2. Pin (9), cotter pin and clevis (8)
Disengage from clevis (8).
3. Cable (5)
Loosen completely.
4. Nuts (6)
Remove.
5. Capscrew (3) and clip (2)
1.
Knob
6.
Nut
7.
Nut
2.
Clip
Remove.
6. Knob (1), stem, cable housing (4)
3.
Capscrew
8.
Clevis
and cable (5)
9.
Pin
4.
Cable housing
5.
Cable
Remove from cable housing (4).
7. Knob, stem and cable (5)
TA 098719
Go on to Sheet 3
2-344
