TM 10-3930-641-34-1
ENGINE FRONT SUPPORT AND TRUNNION REMOVAL/INSTALLATION (CONT)
(Sheet 9 of 11)
LOCATION/ITEM
ACTION
REMARKS
45. Drain hose
Remove from engine oil pan.
46. Torque converter
a. Disconnect hose assembly (38).
b. Cap or plug openings.
NOTE
Have container ready to catch coolant when
lines are disconnected.
47. Transmission oil cooler lines
a. Disconnect two lines (36) from oil cooler.
b. Remove two capscrews and clamp (37).
c. Disconnect bottom line from torque converter
and remove.
d. Cap or plug openings.
NOTE
Have container ready to catch coolant when
lines are disconnected.
48. Heater hoses (39) and (41).
a. Disconnect from engine and cap.
b.
Remove capscrew from clip (42) holding
heater hose to engine.
49. Engine oil cooler
a. Disconnect two hose assemblies (40).
b. Cap or plug openings.
Go on to Sheet 10
3-14
