TM 10-3930-641-34-1
ENGINE FRONT SUPPORT AND TRUNNION REMOVAL/INSTALLATION (CONT)
(Sheet 3 of 9)
LOCATION/ITEM
ACTION
REMARKS
2. Engine, torque converter
a. Fasten hoist to engine lifting eyes.
b.
Lower torque converter and engine into
position
NOTE
Position engine in rear engine supports first.
3. Frame capscrews
Install four capscrews at front of engine to frame.
4. Caps and bolts
Install caps (3) and capscrews on each side of
engine on rear engine supports.
5. Wiring harness groups (4)
Connect to plugs on back of relay panel.
6. Frame ground wire and battery
Connect to starter (7).
cables (5) and (6)
NOTE
Make sure caps and plugs are removed from
hoses and openings before hoses are
reconnected.
3-19
