TM 10-3930-641-34-1
GOVERNOR REMOVAL AND INSTALLATION (CONT)
(Sheet 2 of 4)
LOCATION/ITEM
ACTION
REMARKS
4. Drive assembly (14)
Install.
5. Gear (13), stop and drive assembly
Aline holes.
6. Pin and ring
7. Gasket and governor housing (7)
Install on governor plate.
8. Spring and stop collar (6)
a. Install.
b. Secure with Allen head capscrew.
9. Timing pin
Remove.
10. Governor
Adjust.
11. Gasket and cover (2)
a. Install on governor housing.
b. Make sure pin in cover aligns with notch in
collar.
12. Fuel ratio control (1)
Install.
End
3-82