TM 10-3930-641-34-1
GOVERNOR DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 8 of 12)
LOCATION/ITEM
ACTION
REMARKS
25.
Piston (74)
Remove from cylinder (73).
26.
Sleeve (76)
Remove from cylinder (73).
27.
Preformed packings (71)
Remove from cylinder (73).
28.
Seal (75)
Remove from sleeve (76).
29.
Dowel (17)
Remove.
30.
Drive assembly (15) and stop (16)
Remove.
31.
Retaining ring (14)
Remove from bottom of gear (96).
32.
Gear (96)
Remove.
33.
Bearing (88)
Remove from governor plate (90).
NOTE
If it is necessary to replace dowels in
governor then see illustration at right for
current installation dimensions.
TA099017
Go on to Sheet 9
3-90