TM 10-3930-641-34-1
SPACER PLATES REMOVAL/INSTALLATION (CONT)
(Sheet 2 of 4)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1.
Seals (1)
Remove from spacer plate (2).
2.
Six 3/8-16 NC forcing screws (3)
a. Install around perimeter of spacer plate.
b. Tighten evenly until spacer plate is free
of dowels.
CAUTION
Do not damage dowels as spacer plate is
removed.
3.
Spacer Plate
Remove.
4.
O-ring seal (4)
Remove from under spacer plate.
TA099089
Go on to Sheet 3
3-247