TM 10-3930-641-34-1
CYLINDER LINER REMOVAL/INSTALLATION (CONT
Sheet 4 of 7)
LOCATION/ITEM
ACTION
REMARKS
2.
Cylinder liner (projection)
NOTE
height (cont)
Be sure the bar is in position at the center of
the liner and the liner surface is clean.
c. Tighten bolts (5) evenly to a torque of
50 lb ft (67.8 N-m)
d. Check the distance from the bottom edge
of the bar (2) to the top edge of the spacer
plate The distance on each end of the bar
must be the same.
Go on to Sheet 5
3-242