TM 10-3930-641-34-1
CAMSHAFT REMOVAL/INSTALLATION (CONT)
(Sheet 5 of 7)
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION
NOTE
Be sure key is in position before installing
camshaft front gear.
CAUTION
Do not use a torch.
1. Camshaft front gear (1)
a.
Heat to maximum temperature of 600F
(315C).
b. Install gear on camshaft (2).
2. Dowel pin (3)
Install in camshaft to extend. 345 + .010 in.
(8.76 + 0.25 mm) from camshaft end.
TA099103
Go on to Sheet 6
3-277
