TM 10-3930-641-34-1
CAMSHAFT REMOVAL/INSTALLATION (CONT)
(Sheet 6 of 7)
LOCATION/ITEM
ACTION
REMARKS
Coat lobes, journals and bearing surfaces inside
cylinder block) with clean engine oil
4. Camshaft
Install until rear of camshaft is even with rear of
cylinder block.
a. Fasten to flywheel housing with safety wire.
b. Position gear and install bolt (5/16-18 NC x 5)
through rear gear into camshaft.
6. Camshaft (6)
a. Align "V" mark on camshaft with "V" mark on
crankshaft gear (7)
b. Install camshaft all the way into cylinder
block.
Go on to Sheet 7
3-278