TM 10-3930-641-34-1
CAMSHAFT BEARINGS REMOVAL/INSTALLATION (CONT)
(Sheet 3 of 3)
LOCATION/ITEM
ACTION
REMARKS
1. Rear camshaft bearing
Install as shown using suitable camshaft bearing
removal/installation tool.
2. Three inside camshaft bearings
Install in same manner.
3.
Front
camshaft
bearing
Install in same manner.
NOTE
Front camshaft bearing must be installed
1.33 + .004 in. (33.8 + 0.1 mm) from machined
surface on front of cylinder block (shown at
TA099107
right).
End
3-282
