TM 10-3930-641-34-1
TIMING GEARS REMOVAL/INSTALLATION (CONT)
(Sheet 2 of 4)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
Implement pump drive gear (1) and
Remove bracket and bolts (3). Install a
housing (2)
5/8"-llNC eyebolt and attach hoist.
Use a gear puller and remove housing with gear.
NOTE
The pump drive weighs 67 lb. (30 kg).
INSTALLATION
1.
Implement pump drive gear (1) and
Install o-ring seal (4) onto housing (2).
housing (2)
Lubricate bore of flywheel housing with
clean engine oil.
2.
Hoist
Install eyebolt into housing and attach
hoist.
TA172250
Go on to Sheet 3
3-297
