TM 10-3930-641-34-1
TIMING GEARS REMOVAL/INSTALLATION (CONT)
(Sheet 4 of 4)
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION
1.
Steering and brake pump drive
Install O-ring seal (4) onto housing (2).
gear (1) and housing (2)
Lubricate bore of flywheel housing with clean
engine oil.
2.
Hoist
Install eyebolt into housing and attach hoist.
3.
Pump drive assembly
Position assembly into flywheel housing.
Secure with capscrews (3).
REMOVAL
Transmission pump drive (1)
Remove capscrews (2) and remove pump
drive assembly (1).
INSTALLATION
Transmission pump drive (1)
Install o-ring seal onto housing. Lubricate
flywheel housing bore with clean engine oil.
Install assembly into flywheel housing and
secure with capscrews (2).
TA172262
End
3-299