TM 10-3930-641-34-1
TIMING GEARS REMOVAL/INSTALLATION (CONT)
(Sheet 4 of 8)
LOCATION/ITEM
ACTION
REMARKS
5.
Bearing cone
With arbor press and adapter install bearing
cone onto gear (3).
6.
Lock (2) and nut (1)
Install new lock (2) and nut (1) onto gear (3).
NOTE
Tighten nut after assembly has been installed
into flywheel housing.
DISASSEMBLY
1.
Steering and brake pump drive
Remove capscrews (7), washers (8) and
gear (1) and housing (2)
retainer (6).
2.
Gear (1)
With arbor press and adapter remove gear (1)
from housing (2).
TA172265
Go on to Sheet 5
3-303
