TM 10-3930-641-34-1
TIMING GEARS REMOVAL/INSTALLATION (CONT)
(Sheet 3 of 8)
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY
1.
Bearing cone (5) on gear (3)
Heat bearing cone in oil to a maximum tem-
perature of 2750 (1350 C). Position gear (3)
with shaft up and install bearing cone over
shaft. The large diameter of cone against
the gear.
2.
Spacer
Install onto gear on top of bearing cone.
3.
Bearing cup
With arbor press install cup into housing (4).
4.
Housing (4)
Install retainer (7) and secure with cap-
screws (6). Position housing (4) onto gear (3).
TA 172264
Go on to Sheet 4
3-302