TM 10-3930-641-34-2
TORQUE CONVERTER INSTALLATION (CONT)
(Sheet 2 of 5)
LOCATION/ITEM
ACTION
REMARKS
1.
Torque converter
Set on wood blocks.
2.
Eleven cover capscrews (20) and
Remove.
lockwashers (21)
3.
Two 1/2-13NC forged eyebolts
Install in cover (2).
4.
Cover (2)
Fasten hoist and remove. Cover weighs 160
lbs. (73 Kg.).
5.
Capscrew (10), retainer (9), yoke (8)
Remove from end of shaft.
6.
Two seals (13)
Remove from carrier assembly.
7.
Six capscrews (7) and lockwashers
Remove.
(6)
8.
Shaft (19) and carrier (14)
Remove as unit.
Go on to Sheet 3
4-18
