TM 10-3930-641-34-2
TRANSMISSION ASSEMBLY (CONT)
(Sheet 21 of 31)
LOCATION/ITEM
ACTION
REMARKS
72.
Three springs (114)
With an arbor press, compress as shown at
right until retaining ring (112) can be in-
stalled over retainer plate (113).
73.
Two seal rings (117)
a. Install on carrier of housing assembly
(115) as shown.
b. Lubricate with clean hydraulic fluid.
74.
Housing assembly (115)
a. Attach hoist.
b. Install in housing assembly (106).
75.
Twenty capscrews (118) and
Install as shown on Sheet 22. Tighten to a
washers (119)
torque of 27-37 lb. ft. (36-50 N-m).
TA099313
Go on to Sheet 22
4-108
