TM 10-3930-641-34-2
TRANSMISSION ASSEMBLY (CONT)
(Sheet 26 of 31)
LOCATION/ITEM
ACTION
REMARKS
88.
Rods, flat washers, nuts
a. Replace with the two original capscrews.
b. Tighten the two capscrews to a torque of
27 to 37 lb. ft. (37 to 51 N-m).
89.
a. Lubricate with clean hydraulic fluid.
b. Install in each of the four planet gears (89)
of the planet carrier (84).
90.
Washers (47)
Install on both sides of each planet gear (89).
91. Planet gear assemblies (bearing
Install in planet carrier (84).
washer, gear)
92.
Planet shafts (87)
NOTE
Be sure pin hole in each shaft aligns with hole
in carrier.
TA099318
Go on to Sheet 27
4-113