TM 10-3930-641-34-2
TRANSMISSION ASSEMBLY (CONT)
LOCATION/ITEM
ACTION
REMARKS
108. Transmission assembly
a. Attach hoist as shown.
b. Lower assembly into transmission case
as shown.
NOTE
Support case on wooden blocks.
c.
Secure assembly to case with the two
capscrews. Tighten the capscrews to a
torque of 65-85 lb. ft. (101.7-115.3
N-m).
d. Turn transmission on its side so that
opening for the transmission hydraulic
controls faces up.
109. Transmission hydraulic controls
Install into transmission case.
4-118
