TM 10-3930-641-34-2
TRANSMISSION HYDRAULIC CONTROLS ASSEMBLY (CONT)
(Sheet 2 of 7)
LOCATION/ITEM
ACTION
REMARKS
1.
Neutralizer valve group (46)
Assemble.
2.
New seal ring (47) and
Install on valve spool (49).
preformed packing (48)
3.
Spring (50) and valve spool (49)
Install in valve body.
4.
Valve spool (49)
Push into valve body until capscrew (52) can
be installed behind and on valve spool.
5.
Capscrew (52)
Tighten to a torque of 19-25 lb. ft. (25-34
N.m).
6.
Divider plate (53)
Position on neutralizer valve.
7.
Selector and pressure control valve
Assemble.
group
Go on to Sheet 3
4-172