TM 10-3930-641-34-2
TRANSMISSION HYDRAULIC CONTROLS ASSEMBLY (CONT)
(Sheet 7 of 7)
LOCATION/ITEM
ACTION
REMARKS
24.
Detent assembly (9) and preformed
Install in valve body as shown.
packing (8)
25.
Direction selector spool (41)
Install in valve body as shown.
26.
Stop (43) and pin (2)
Install to hold direction selector spool (41).
27.
Detent assembly
Install in bore in valve body.
28.
Selector and pressure control valve
Position on divider plate (53).
group (7)
29.
Transmission hydraulic control valve
Tighten capscrews to a torque of 19-25 lb. ft.
capscrews (44) and washers (45)
(26-34 N m).
3'0.
Transmission hydraulic controls
Install.
See Transmission Hydraulic Controls/Installation
End
4-177