TM 10-3930-641-34-2
TRANSMISSION HYDRAULIC CONTROLS ASSEMBLY (CONT)
(Sheet 5 of 7)
LOCATION/ITEM
ACTION
REMARKS
8.
Two stops (17) and (34)
a. Install in center parts of valve body.
b. Make sure holes in stops and valve bodies
are aligned.
9.
Two pins (3)
Install to hold stops.
10.
Slug (32)
Install in ratio spool (31).
11.
Spring (33) and safety spool (35)
Install in valve body.
12.
Pin (4)
Install to hold valve spool and spring.
13.
Safety spool (35)
Turn around.
14.
Two springs (36) and (37) and
Install in safety spool (35).
retainer (38)
15.
Retainer (38)
Push into valve spool, and install snap ring.
Go on to Sheet 6
4-175