TM 10-3930-641-34-2
TRANSMISSION OIL COOLER REMOVAL/INSTALLATION (CONT)
(Sheet 3 of 4)
LOCATION/ITEM
ACTION
REMARKS
8.
Transmission oil cooler
Remove.
9.
Water elbow (8)
Remove.
10.
Tube bundles
Clean by passing a .125 in (3.2 mm) rod
through each tube.
INSTALLATION
1.
Water elbow (8)
Install on transmission oil cooler with new
O-ring seal.
2.
Hoist
Attach to transmission oil cooler.
3.
Transmission oil cooler
Put in position and install bolts to hold it to
engine and water cooler.
4.
Oil lines (4) and (5)
Connect to bottom of transmission oil cooler.
5.
Clamp to hold oil lines to engine
Install.
6.
Hose assemblies (3)
Connect to fitting.
TA099374
Go on to sheet 4
4-199