TM 10-3930-641-34-2
TRANSMISSION CONTROL LOCK DISASSEMBLY (CONT)
(Sheet 4 of 4)
LOCATION/ITEM
ACTION
REMARKS
6.
Plunger assembly (4)
Push into detent groove of plunger (12) to
allow removal of rail assembly (22 thru 29).
7.
Rail assembly (22 thru 29)
Remove.
8.
Plunger (12), plunger assembly
Remove.
group (3 thru 8)
9.
Ring (29) and pin (28)
Remove from end of rail (27).
10. Springs (24), sleeve (25), sleeve (23),
Remove from rail.
nut (22)
11.
Seal (26) in sleeve (23)
Discard if damaged.
12.
Ring (3)
Remove from sleeve (7).
13.
Two plunger assemblies (4) and
Remove from sleeve (7).
springs (5) and (6)
14.
Preformed packings (2), (13), (16),
Discard if damaged.
(30), (31), (33), (34), (35)
End
4-220
