TM10-3930-641-34-2
TRANSMISSION CONTROL LOCK ASSEMBLY (CONT)
(Sheet 2 of 4)
LOCATION/ITEM
ACTION
REMARKS
NOTE
Be sure all parts are clean and coated with
fresh hydraulic oil before assembly.
1.
Ring (3)
Install in sleeve (7).
2.
Plunger assembly (4), spring (6),
a. Install in sleeve (7).
spring (5) and plunger assembly
(4)
b.
Secure with second ring (3).
3.
Seal (26)
Install in sleeve (23).
4.
Spring (24), sleeve (25), spring
Install on rail (27).
(24) and sleeve (23)
5.
Nut (22)
Install on rail. Tighten to a torque of 41-63
lb. ft. (55-85 N-m).
6.
Pin (28) and retaining ring (29)
Install in end of rail with retaining ring
pliers.
7.
Preformed packings (30) and (31)
Install in housing (9).
for rail assembly
Go on to Sheet 3
4-222
