TM 10-3930-641-34-2
TRANSMISSION CONTROL LOCK DISASSEMBLY
(CONT) (sheet 2 of
4)
LOCATION/ITEM
ACTION
REMARKS
1. Switch assembly (19)
Remove from transmission control lock.
2.
Two plugs (1) and (36), and pre-
Remove.
formed packings (2) and (13)
3.
Cylinder (14) and preformed
Remove from housing.
packing (13)
4.
Connector (17), piston (15), and
Remove from cylinder.
preformed packing (16)
5.
Plunger (12)
Position so that detent groove in plunger
appears in center of bore for plug (1) as
shown.
TA099383
Go on to Sheet 3
4-218