TM 10-3930-641-34-2
DIFFERENTIAL AND BEVEL GEAR DISASSEMBLY(CONT)
(Sheet 6 of 7)
LOCATION/ITEM
ACTION
REMARKS
17. Differential
a. Install pipe through differential as shown.
b. Attach hoist to pipe.
NOTE
Differential weighs 370 lb. (167.8 Kg).
c. Remove differential from carrier assembly.
18. Bearing cones (2) and (8)
Remove from each side of differential.
19. Capscrews (47) and washers (48)
Remove.
20. Case plain half (49) and case
a. To insure correct alignment later, mark
flange half (46)
line across joint with scribe or grease
pencil.
b. Remove case plain half (49).
TA099416
Go on to Sheet 7
4-276
