TM 10-3930-641-34-2
DIFFERENTIAL, BEVEL GEAR AND GEAR DISASSEMBLY (CONT)
(Sheet 2 of 7)
LOCATION/ITEM
ACTION
REMARKS
1. Differential and bevel gear
Position on repair stand as shown.
2. Capscrews (23), washers (5)
Remove.
3. Yoke assembly (31)
a. Fasten to hoist.
NOTE
Unit weighs 280 lb. (127 Kg).
b. Remove with housing (22) attached.
c. Set on suitable work surface.
4. Shims (17) under housing
Remove.
5. Capscrew (28), retainer (29),
Remove from pinion shaft.
preformed packings (30), yoke
assembly (31)
6. Capscrews (35), lockwashers (36)
Remove.
7. Retainer (37), O-ring
Remove.
NOTE
Discard O-ring if damaged.
TA099412
Go on to Sheet 3
4-272
