TM 10-3930-641-34-2
DIFFERENTIAL AND BEVEL GEAR ASSEMBLY (CONT)
(Sheet 6 of 11)
LOCATION/ITEM
ACTION
REMARKS
11.
Preformed packing between housing
Install.
(22) and retainer (37)
12.
Retainer (37)
Install on housing and secure with capscrews
(35).
13.
Guard (33), yoke (32), packing (30)
a. Install.
retainer (29), capscrew (28)
b. Tighten capscrew (28) to a torque of
265 + 35 lb. ft. (359.3 + 47.5 N-m).
14.
Case flange half (46)
a. Fasten to hoist.
b. Put in position on ring gear (6).
15.
Washers (5), capscrews (4)
a. Coat threads of capscrews and face of
washers with clean oil.
b. Install to secure case to ring gear.
c.
Tighten capscrews to a torque of
350 + 35 lb. ft. (474.5 + 47.5 N-m).
Go on to Sheet 7
4-283