TM 10-3930-641-34-2
DIFFERENTIAL AND BEVEL GEAR ASSEMBLY (CONT)
(Sheet 10 of 11)
LOCATION/ITEM
ACTION
REMARKS
30. Bearing cup (7) bearing cap (15),
Install on upper bearing cone of differential.
adjusting ring (1)
31.
Two 3/4-10 NC guide pins
Install in housing (22) side of carrier assembly.
32.
Shims (17)
Install.
CAUTION
Use the exact thickness of shims specified on
the bevel pinion shaft. If incorrect shims are
used, differential cannot be adjusted properly.
33.
Preformed packing (21)
Install in housing (22).
34.
Housing (22) assembly
a. Attach hoist.
b. Using the two guide pins for alignment,
install on carrier assembly.
Go on to Sheet 11
4-287