TM 10-3930-641-34-2
SUPPLEMENTAL STEERING PUMP DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 5 of 5)
LOCATION/ITEM
ACTION
REMARKS
6.
Seals (6) and preformed packing (12)
Slip over ends of shafts (10) and (11).
7.
Drive gear (10)
Turn by hand a few rotations to be sure gears
turn freely.
8.
Preformed packing (3)
Install in groove in body assembly (1).
9.
Body assembly (1)
Position on housing (20).
10.
Capscrews (15) and washers (14)
Install.
NOTE
Tighten capscrews to a torque of 80 lb. ft. to
90 lb. ft. (108.5-122 N-m).
End
6-78