TM 10-3930-641-34-2
TEE TEST PROCEDURE FOR STEERING SYSTEM (CONT)
(Sheet 6 of 24)
LOCATION/ITEM
ACTION
REMARKS
6.
Return line assembly (D) and pump
Connect to flow meter (B).
supply line adapter (C)
7.
Install.
b. Tachometer drive
Install.
c. Cable
Install between generator and input connection
for tachometer on flow meter.
8.
Shipping link
Install. See TM 10-3930-641-20.
PREPARATION OF SYSTEM
FOR TEST
1.
Manual load valve on the flow meter
Open fully.
2.
Steering wheel
Turn continuously.
3.
Engine
Run at test rpm. See chart on sheet 4.
TA098987
Go on to Sheet 7
6-102
TM 10-3930-641-34-2
TEE TEST PROCEDURE FOR STEERING SYSTEM (CONT)
(Sheet 7 of 24)
LOCATION/ITEM
ACTION
REMARKS
4.
Manual load valve on flow meter
Close valve slowly until pressure goes up to
1000 psi (703 kgs/sq. meter).
