TM 10-3930-641-34
TEE TEST PROCEDURE FOR STEERING SYSTEM (CONT)
(Sheet 8 of 24)
LOCATION/ITEM
ACTION
REMARKS
TEST 1 |
MAXIMUM PRESSURE
NOTE
RELIEF VALVE SETTING
Turn steering wheel continuously through the
test. Record all test data.
1. Manual load valve on flow meter
Open all the way.
2. Engine
Maintain at 2000 rpm.
3. Manual load valve
Slowly close until oil flow through meter
stops. Record the pressure.
4. Steering relief valve
Maximum pressure must be no higher than
See page 6-28.
2575 lb. psi (1810 kgs/sq. meter).
CAUTION
Manual load valve must be opened slowly be-
fore turning steering wheel back to center.
This will prevent damage to the pressure gage.
Go on to Sheet 9
6-104
