TM10 3930-641-34-2
TILT CYLINDER DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 5 of 7)
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY
NOTE
Clean all parts.
1. Wiper ring (9)
Install in nut (10).
2. Back-up ring (13)
Install on cap (12).
NOTE
Back-up ring (13) must be installed with curved
(concave) surface toward the preformed
packing (14).
3. Preformed packing (14)
Install on cap (12).
4. Packing (11)
Install in cap (12).
5. Preformed packing (7)
Install on piston (4).
6. Three packing rings (5)
Install on piston (4).
Go on to Sheet 6
7-58
