TM10 3930-641-34-2
TILT CYLINDER DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 6 of 7)
LOCATION/ITEM
ACTION
REMARKS
7. Nut (10)
Put on rod.4
8. Cap (12)
Put on rod.
9. Spacer (6)
Put on rod.
10. Piston (4)
Put on rod.
11. Nut (3)
Install and tighten with torque multiplier,
adapter and socket. Use tool to hold rod.
NOTE
Tighten nut to a torque of 2225 lb. ft. to 2275
lb. ft. (3016.7-3084.5 N-m).
12. Cylinder (2)
Install over rod assembly.
NOTE
Grease piston, spacer, and cap with general
purpose grease before installation.
Go on to Sheet 7
7-59
