TM 10-3930-675-10-1
PREPARATION FOR TRANSPORT - CONTINUED
0007 00
MARINE TRANSPORT - CONTINUED
WARNING
Always use a ground guide and DO NOT exceed 1 mph (1.6 kph) when driving RTCH up ramps in
preparation for marine transport. Failure to use a ground guide may result in an accident, causing
death or injury to personnel or damage to equipment.
g. Back RTCH up ramp at door or bulkhead entry of ship. As vehicle approaches ship, lower boom to horizontal full-
down position.
h. Shut down RTCH engine.
Unload RTCH from Ship.
2.
NOTE
Perform steps a through e for MPS.
a. Start RTCH engine.
WARNING
Always use a ground guide and DO NOT exceed 1 mph (1.6 kph) when driving RTCH down ramps
after marine transport. Failure to use a ground guide may result in an accident, causing death or
injury to personnel or damage to equipment.
b. Drive RTCH out vehicle ramp at door or bulkhead entry of ship.
c. Rotate tophandler 90 degrees counterclockwise to operational position.
d. Shut down RTCH engine.
e. Return boom support and cab to operational position. Refer to Placing Cab in Transport Position and Placing Boom
Support in Transport Position in this work package.
NOTE
Perform steps f through h for ships equipped with roll-on/roll-off RO/RO capabilities.
f. Start RTCH engine.
WARNING
Always use a ground guide and DO NOT exceed 1 mph (1.6 kph) when driving RTCH down ramps
after marine transport. Failure to use a ground guide may result in an accident, causing death or
injury to personnel or damage to equipment.
g. Drive RTCH out vehicle ramp at door or bulkhead entry of ship.
h. Shut down RTCH engine.
0007 00-14
