TM 10-3930-675-10-1
PREPARATION FOR TRANSPORT - CONTINUED
0007 00
AIR TRANSPORT - CONTINUED
k. Stow ramp in dolly wheel storage compartment. Secure ramp with straps.
l. Raise tophandler so that dolly wheels are off the ground approximately 2 ft (61 cm).
m.Install lower pin from outside toward center of tophandler in lower hole of each dolly wheel. Lock pin in position
with retaining pin.
RETAINING
UPPER
PINS
PIN
LOWER
DOLLY
PIN
WHEEL
n. Lower tophandler until all four dolly wheels are resting on ground.
o. At side of locking valve at base of each lift cylinder, loosen float valve jamnut and turn float valve screw five turns
counterclockwise. Retighten jamnut to prevent loss.
LOCKING VALVE
VALVE SCREW
JAMNUT
0007 00-17
