CAB IN OPERATIONAL POSITION

PREPARATION FOR TRANSPORT - TM-10-3930-675-10_87

PLACING CAB IN TRANSPORT POSITION - CONTINUED

TM-10-3930-675-10 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
55

TM 10-3930-675-10 0007 00-2 PREPARATION FOR TRANSPORT - CONTINUED 0007 00 PLACING CAB IN TRANSPORT POSITION - CONTINUED a. Run RTCH engine at idle. NOTE Skip step b if RTCH cab is being moved to transport position in order to perform maintenance or if boom support is not going to be lowered. b. If boom support is to be lowered, remove retaining pin from boom support locking pin extension on each side of boom support. c. Release cab by removing two retaining pins and pins from cab subframe. d. Remove two retaining pins and remove handrail. BOOM SUPPORT LOCKING PIN BOOM SUPPORT RETAINING RING BOOM SUPPORT LOCKING PIN EXTENSION CAB IN OPERATIONAL POSITION CAB SUBFRAME PIN RETAINING PIN

Privacy Statement
Press Release
Contact