TM 10-3930-675-10
0007 00-4
PREPARATION FOR TRANSPORT - CONTINUED
0007 00
PLACING CAB IN TRANSPORT POSITION - CONTINUED
NOTE
Pins should be installed from the rear. Install rearmost pin first.
k.
Install two pins and retaining pins to secure cab in transport position.
l.
Reinstall handrail, now configured as a ladder, on cab in transport position. Secure with two retaining pins.
m. Push auxiliary pump switch on instrument panel inside cab to turn off pump.
2.
Return Cab to Operational Position.
a.
Run RTCH engine at idle.
CAB IN TRANSPORT POSITION
PIN
RETAINING
PIN
LADDER
