TM 10-3930-675-20-1
0007 00-20
ENGINE FUEL INJECTOR CIRCUITS TROUBLESHOOTING - CONTINUED
0007 00
Table 6. Error Code 1321 - Injector Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1321 - Injector Circuit Failure -
Continued
b. Measure resistance from
actuator harness connector
pin 26 to all other pins in
sensor harness connector.
Resistance
should
be
greater than 100k ohms.
a. If resistance is not as
specified, repair or replace
connectors (WP 0111 00).
b. If internal actuator harness
requires replacement, notify
SRA.
c. Measure resistance from
actuator harness connector
pin 36 to all other pins in
actuator harness connector.
Resistance
should
be
greater than 100k ohms.
a. If resistance is not as
specified, repair or replace
connectors (WP 0111 00).
b. If internal actuator harness
requires replacement, notify
SRA.
d. Measure resistance from
actuator harness connector
pin 36 to all other pins in
sensor harness connector.
Resistance
should
be
greater than 100k ohms.
a. If resistance is not as
specified, repair or replace
connectors (WP 0111 00).
b. If internal actuator harness
requires replacement, notify
SRA.
>100K OHMS
