TM 10-3930-675-20-10007 00-43ENGINE FUEL INJECTOR CIRCUITS TROUBLESHOOTING - CONTINUED0007 00Table 9. Error Code 1324 - Injector Circuit Failure Troubleshooting Procedures - Continued.MALFUNCTIONTEST OR INSPECTIONCORRECTIVE ACTIONError Code 1324 - Injector Circuit Failure -Continued8. Place ignition switch to OFFposition and disconnectinternal actuator harness frominjector solenoid connectorand disconnect injectorsolenoid wires from solenoid.a. Measure resistance frompin A (or 1) of injectorsolenoid connector toinjector wire pigtail nut.Resistance should be lessthan 10 ohms.a. If resistance is as specified,notify SRA to replaceinternal actuator harness.b. If resistance is not asspecified, replace injectorsolenoid wires.b. Measure resistance frompin B (or 2) of injectorsolenoid connector toinjector wire pigtail nut.Resistance should be lessthan 10 ohms.a. If resistance is as specified,notify SRA to replaceinternal actuator harness.b. If resistance is not asspecified, replace injectorsolenoid wires.<10 OHMS
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business