TM 10-3930-675-20-1
0007 00-44
ENGINE FUEL INJECTOR CIRCUITS TROUBLESHOOTING - CONTINUED
0007 00
Table 9. Error Code 1324 - Injector Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1324 - Injector Circuit Failure -
Continued
9. Place ignition switch to OFF
position and, with rocker arm
cover removed, disconnect
internal actuator harness from
15-pin connector.
a. Measure resistance from
pin 1 (or A) on internal
harness side of actuator
harness 15-pin connector to
all other pins in connector.
Resistance
should
be
greater than 100k ohms.
If resistance is not as specified,
notify SRA to replace internal
actuator harness.
b. Measure resistance from
pin 2 (or B) on internal
harness side of actuator
harness 15-pin connector to
all other pins in connector.
Resistance
should
be
greater than 100k ohms.
If resistance is not as specified,
notify SRA to replace internal
actuator harness.
10.Place ignition switch to OFF
position and, with rocker arm
cover removed, disconnect
injector solenoid connector
on internal actuator harness
from no. 3 injector solenoid.
>100K OHMS
